Use and Care Manual

HOW TO USE YOUR PANCAKEBOT

7. Make sure the Filter is inside the Filter Housing.

8. Connect the Air Hose to the Dispenser Bottle Fill

Cap. The other end should be connected to the

Filter Housing.

9. Connect the other Air Hose to the Gantry. The Air

Hose insertion point on the Gantry is located on

the back side of the PancakeBot, just above the

Main Leg. The other end of the Air Hose should

be connected to the Filter Housing.

10. Lift the Cable Connector Lid and attach the

Gantry Cable to the Cable Connector. You may

hear a faint click as the tab locks into place.

NOTE: To disconnect the Gantry Cable, press on

the top of the small tab on the Gantry Cable and

then pull upwards.