TV

Copyright © 2010 Digital Alert Systems a division of Monroe Electronics Inc.
Information herein is considered accurate at the time of publication. We constantly strive to improve our products and services
therefore some specifications are subject to change without notice.
DASDEC, MultiStation and EAS-Net are trademarks of Digital Alert Systems and Monroe Electronics.
All rights reserved. | Printed in the U.S.A.
DASDEC-II Specifications
Audio Inputs:
-Four (4) monaural EAS monitoring inputs
-Optional DAS3RAD integrated receivers use 3 inputs when
installed
-Optional EXP-EAS adds two (2) additional monaural inputs
-One-pair (1) balanced 600W stereo audio (program in)
switched 14-pin detachable terminal strip.
-One (1) AES/EBU digital audio (program in) switched 110W
male XLR via supplied pigtail
-Auto-set to incoming sample rate, or 48 KHz without
reference input
Audio Outputs:
-Four (4) monaural, un-balanced lo-Z audio outputs
-One-pair (1) balanced 600W stereo audio (program out)
-14-pin detachable terminal strip.
-One (1) AES/EBU digital audio (program out) switched 110W
female XLR via supplied pigtail
Internal Character Generator:
- Standard RS-170A NTSC1Vpp (100IRE)
- RCA-type connector (RCA to F adapter included)
- S-Video 4-pin connector
Controls:
LAN Interface: TCP/IP Ethernet RJ45
-Standard: One (1) 10/100BASE-T RJ45
-Optional:
EXP-3NIC Adds three (3) 10/100BASE-T RJ45 ports
EXP-3NICGIG Adds three (3) 10/100/1000BASE-T RJ45 ports
-Each port features green link & amber data indicators
-IP addressing by DHCP (ports 1 & 2), or fixed (ports 1-4)
(unit ships fixed at 192.168.0.200)
GPI/O’s (General Purpose Inputs/Outputs):
-Two (2) software defined inputs
-Two (2) software defined outputs rated 2A @30VDC
-7-pin detachable terminal strip
Serial Port
-One (1) RS232 data 9 pin “D” connector
-Optional USB/4RS232 adds 4 additional RS-232 ports
USB ports:
-Two (2) USB V2.0/1.1 type A sockets
IEEE-139 (“FireWire”)
-One (1) IEEE-1394 “FireWire” 400 6-conductor port
Local Control Ports
-Keyboard PS-2 type socket
-Mouse PS-2 type socket
-Monitor 15-pin VGA socket
Compliance:
-FCC Certified FCC ID: R8VDASDEC-1EN
Operating System: Supports Secure Socket Layer (SSL)
based https password protected and SSH based data transfer
including an internal firewall
Front Panel
-Backlit LCD matrix display: 2 rows of 20 characters
-Displays: IP address, software version, date & time,
active EAS event message, user set unit name
-Dual status lamps
Optional DAS3RAD Internal Radios:
-Three independent radio receivers
-Input 50W input “F” type connector
-Tunable frequencies
-AM 520 KHz to 1720 KHz
-FM 76 MHz to 108 MHz
-WX162.4 MHz to 162.55 MHz
Expansion Port:
-Single Expansion Slot accommodates either
EXP-EAS, or EXP-GPIO, or MPEG2-4 options
Physical Attributes:
-19.0” W x 12.0” D x 3.50” H (2RU EIA rackmount)
Power Requirements:
-Input 120VAC @ .4 amps (48 Watts)
Weight: 15 lbs
585-765-1155 | fax [phone]
100 Housel Ave. | Lyndonville | NY | 14098
www.digitalalert syst ems. com
A Division of Monroe Electronics
Picture shown with some optional equipment installed.
Confidence in Compliance
Each EAS alert received and processed by the DASDEC-II is stored in non-volatile
memory. And we mean the complete message including the incoming audio! The
DASDEC also features a series of comprehensive e-mail tools to keep everyone up-to-
date and aware as well as connecting to a wide range of local or network printers
when hardcopies are needed. Forget managing multiple paper tape trails.
While the internal storage retains tens of thousands – several years’ of EAS alert
messages – there’s an array of external storage options available to further your
confidence in compliance. And don’t worry about setting or resetting the time, DASDEC
synchronizes its clock with an atomic reference to ensure it’s always accurate and
compliance is maintained.
CAP is coming. CAP is coming. CAP is here.
Common Alerting Protocol (CAP) is the latest in the ever-changing EAS landscape. As a
founding member of the EAS-CAP Industry Group (www.eas-cap.org) Digital Alert
Systems is on the forefront of this change. And, while the final standards are in flux,
rest assured the DASDEC-II is the right platform for EAS-CAP integration. Please note
based on final FCC/FEMA approach, it may require additional hardware or software not
currently included.
Take a look. You’ll like what you see.
The DASDEC-II from Digital Alert Systems, the most complete emergency messaging
system available - now and for the future. Backed by a team of top developers,
engineers and support professionals, the DASDEC is the EAS solution. Find out why
more than 1000 facilities already use the DASDEC for their EAS needs. Contact your
Digital Alert Systems representative today for a FREE on-line demonstration and to
learn how you can streamline and improve your EAS requirements. Don’t wait. Call
585-765-1155 or visit www.digitalertsystems.com today. The DASDEC-II from
Digital Alert Systems, a division of Monroe Electronics, the company you can trust.
1 Device must have full web browser capable of secure login and HTML rendering.
2 Factory installed option. Please check with your DAS representative it there are any questions.
3 Standard in all Television and EOC packages. Optional in all Radio packages.
4 Using EXP-3NICGIG option.