User Guide User Manual

The Menu User guide
78
National character set
(Country)
Selects the national character set. These character sets can be
used according to the selected emulation.
The character sets are not necessarily available for all fonts; see
also Available character sets and fonts
(page 142).
Press Country (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: See Available character sets and fonts
(page 142)
Default Setting: E-US ASCII
Confirm the setting by pressing the Set key (1).
Slashed zero (Sl.Zero) Selects if normal zero (0) or the slashed zero (Ø) is printed.
Press Sl.Zero (3) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Off/On
Default Setting: Off
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Country Sl.Zero
Online
Setup
21
3
4
Back Next
E-US ASCII *
Online
Setup
Set < > Exit
21
3
4
Country Sl.Zero
Online
Setup
Back Next
21
3
4
Sl.Zero=Off *
Online
Setup
Set < > Exit
21
3
4