User Guide User Manual

User guide Emulations
159
Additional information is provided in the Genicom Program-
mer’s Application Manual on this CD-ROM.
ESC [ p1 ’ Horizontal Position Absolute (HPA)
ESC [ p1 a Horizontal Position Relative (HPR)
ESC [ p1 d Vertical Position Absolute (VPA)
ESC [ p1 j Horizontal Position Backward (HPB)
ESC [ p1 k Vertical Position Backward (VPB)
ESC [ p1 q Select Graphics Mode/Density (GENGRM)
ESC [ p1 t Special Print Mode (Oversize/Expanded/Bar code Mode – GENSPM)
ESC [ p1; p2 f Horizontal and Vertical Position Absolute (HVP)
ESC [ p1 e Vertical Position Relative (VPR)
ESC [ p1; pn p Assign Source for Forms (GENASF)
ESC [ p1 x Selects National character set (Select National Characters – GENSNC
ESC [ p1; p2 SP{ Cut paper at current position
ETX End of transmission
FF Form Feed
HT Horizontal tab
LF Line Feed
NUL Ignored
OSC Operating System Command, ESC ]
SI Shift In
SO Shift Out
SP Space
VT Vertical tab
Code Function