User Guide User Manual

User guide Emulations
157
Additional information is provided in the Programmer’s Appli-
cation Manual on this CD-ROM.


<ESC>W<n> Continuous double width ON/OFF


<ESC>w<n> Double height print ON/OFF


<ESC>x<n> Set print quality (PQ)


<ESC>x<0> sets Draft or HS


<ESC>x<1> sets LQ or HQ

<ESC>X Font selection according to pitch and points


<ESC>X<n><m> Set left and right margin


<ESC>Y<n1> <n2> Set graphics print to 120 dpi


<ESC>Z<n1> <n2> Set graphics print to 240 dpi


<ESC>+F Assign character set G3


<ESC>| Character generator LS3R


<ESC>} Character generator LS2R


<ESC>~ Character generator LS1R


<FF> Form feed


<HT> Horizontal tab jump

<HTS> Set tab stop at actual horizontal position

<IND> Line feed without CR


<LF> Line feed

<NEL> Line feed with CR

<PLD> Half step line feed

<PLU> Half step line feed back

<RI> Line feed without CR back


<SI> Condensed printing of 17.1 cpi ON

<SI> Switching the character generator (SS 3)


<SO> Double-wide printing ON

<SO> Switching the character generator (SS 2)


<VT> Vertical tab jump

<VTS> Set tab stop at current vertical position
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function