User Guide User Manual

User guide Emulations
155


<ESC>0 Set line feed to 1/8 inch

<ESC>1 Set line feed to 7/72 inch


<ESC>2 Set line feed to 1/6 inch

<ESC>2 Set line feed to n/72 inch


<ESC>3<n> Set line feed to n/180 inch

<ESC>3>n> Set line feed to n/216 inch


<ESC>4 Italics ON


<ESC>4 Set beginning of form


<ESC>5 Italics OFF


<ESC>5<n> Autom. line feed ON/OFF


<ESC>6 Print ASCII codes dec. 129 to dec. 159


<ESC>6 PC character set 2 (expanded)


<ESC>7 Suppress ASCII codes 129 to 159


<ESC>7 PC character set 1 (standard)

<ESC>a<n> Select orientation


<ESC>A<n> Line spacing n/60 inch

<ESC>A<n> Prepare line spacing n/72 inch

<ESC>b<m><0> Clear all tabs

<ESC>b<m><n><0> Set vertical tabs in channels


<ESC>B<0> Clear all vertical tabs


<ESC>B<n1>...<n16><0> Set vertical tabs


<ESC>B<n1>...<n64><0> Set vertical tabs

<ESC>c Reset to initialisation status

<ESC>c Setting the horizontal motion index (HMI)


<ESC>C<0><n> Set form length in inches


<ESC>C<n> Set form length in lines


<ESC>d<n1> <n2> Perform relative horizontal step


<ESC>D<0> Clear all horizontal tabs


<ESC>D<n1>...<n32><0> Set horizontal tabs


<ESC><DC2> Condensed printing OFF


<ESC><DC4> Double-wide printing OFF (set with <SO> or
<ESC><SO>)


<ESC>E Bold ON


<ESC><EM>0 Deselect single sheet operation


<ESC><EM>1 Bin 1 rear (ASF-R), option


<ESC><EM>2 Bin 2 front ( ASF-F), option


<ESC><EM>4 Select single sheet operation
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function