User Guide User Manual

User guide Emulations
153


<ESC>[4y Selecting NLQ or HS printing quality at 10 cpi


<ESC>[4z Line density 8 lpi (= line spacing 1/8 inch)


<ESC>[5{ Select fanfold paper mode tractor 1


<ESC>[6{ Select fanfold paper mode tractor 2


<ESC>[50m Proportional font OFF


<ESC>[50{ Page at print position


<ESC>[51{ Page at tear off position (perforation)


<ESC>[52{ Page at view position


<ESC>[53m Overlining ON


<ESC>[54{ Cut at current line (option)


<ESC>[55m Overlining OFF


<ESC>[5n Request status report


<ESC>[5w Set 12 cpi


<ESC>[5y NLQ or HS with 12 cpi


<ESC>[5z Graphics normal


<ESC>[6~ Initialize the printer


<ESC>[6 SP K Set horizontal pitch to 6 cpi


<ESC>[6w Set 15 cpi


<ESC>[6z Graphics inverted


<ESC>[7w Set 17.1 cpi


<ESC>[7y Proportional font OFF


<ESC>[7z Bit 8 = unchanged


<ESC>[8w Reset double stroke


<ESC>[8y Right justification ON


<ESC>[8z Set bit 8 = 0


<ESC>[9 SP L Set vertical spacing to 2 lpi


<ESC>[9w Set double stroke


<ESC>[9y Centering ON


<ESC>[9z Set bit 8 = 1

<ESC>[g<n1> <n2><0> Set graphics print to 60 dpi

<ESC>[g<n1> <n2><1> Set graphics print to 120 dpi

<ESC>[g<n1> <n2><11> Set graphics print to 180 dpi

<ESC>[g<n1> <n2><12> Set graphics print to 360 dpi

<ESC>[g<n1> <n2><2> Set graphics print to 120 dpi

<ESC>[g<n1> <n2><3> Set graphics print to 240 dpi

<ESC>[g<n1> <n2><8> Set graphics print to 60 dpi

<ESC>[g<n1> <n2><9> Set graphics print to 120 dpi
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function