User Guide User Manual
User guide Emulations
151
<ESC>[?<n>~ Change emulation
<ESC>[@<n1> <n2>... Set double height
<ESC>[\<n1> <n2>... Change vertical base units
<ESC>[0;;n{ Select single sheet operation
<ESC>[0;0r Clear top and bottom margin
<ESC>[0;0s Clear left and right margin
<ESC>[0g Clear horizontal tab at the current printhead position
<ESC>[0m Clear all selected fonts
<ESC>[0m Reset colour (reserved)
<ESC>[0 SP I Measuring unit decipoint
<ESC>[0 SP K Set horizontal pitch to 10 cpi
<ESC>[0 SP L Set vertical spacing to 6 lpi
<ESC>[0 SP X High print quality
<ESC>[0w Set 5 cpi
<ESC>[0y Selecting Draft or HS
printing quality
<ESC>[0z Superscript ON
<ESC>[10m Font 0 Default: Draft or HS Roman
<ESC>[10y Right and centre adjustment OFF
<ESC>[10z Microscript ON
<ESC>[11e Set PUM (absolute measuring unit) to OFF
<ESC>[11h Set PUM (absolute measuring unit) to ON
<ESC>[11m Font 1 Default: HS Courier
<ESC>[11w Set 20 cpi
<ESC>[11y Select print quality Draft or HS
<ESC>[12m Font 2 Default: HQ Courier
<ESC>[12 SP K Set horizontal pitch to 12 cpi
<ESC>[12w Set horizontal pitch to 10 cpi
<ESC>[12y Select print quality LQ or HQ
<ESC>[12z Double height ON (top portion)
<ESC>[13m Font 3 Default: HS S Serif
<ESC>[13y HQ with high resolution
<ESC>[13z Double height ON (lower portion)
<ESC>[14m Font 4 Default: HQ S Serif
<ESC>[15m Font 5 Default: HQ Roman
<ESC>[15 SP K Set horizontal pitch to 15 cpi
<ESC>[16m Font 6 Default: HQ in actual font
<ESC>[17m Font 7 Default: HQ in actual font
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function