User Guide User Manual

Emulations User guide
150


<ESC>*MI>F Assign character set G2


<ESC>-<n> Underlining ON/OFF

<ESC>/<m> Select vertical tab channels

<ESC>. Printing raster graphics


<ESC>: Condensed printing 12 cpi ON


<ESC>:<0><n><m> Copy ROM character set


<ESC>< Unidirectional printing for 1 line


<ESC>= Set bit 8 = 0


<ESC>=<C1><C2>... Load font/character set


<ESC>> Set bit 8 = 1


<ESC>?<s><n> Reload a graphics mode


<ESC>@ Initialize printer


<ESC>[ MTPL start character for programming sequence


<ESC>[$A<n1><n2> Fast graphic print with 90 dpi


<ESC>[$B<n1><n2> Fast graphic print with 180 dpi


<ESC>[+0<u> Compmode = On


<ESC>[+1<u> Compmpde = Off

  
<ESC>[:y Right justification and centering OFF
 <ESC>[$A<n1><n2> Fast graphic print 90 dpi vertical
 <ESC>[$B<n1><n2> Fast graphic print 180 dpi vertical


<ESC>[=z Bold ON


<ESC>[>z Bold OFF


<ESC>[?1~ MTPL command set


<ESC>[?10~ Barcode interpretation OFF


<ESC>[?11~ Start barcode interpretation


<ESC>[?4~ MTPL + IBM Proprinter-24 command set


<ESC>[?50h Selecting character sets with 256 characters


<ESC>[?50l Selecting character sets with 94 characters


<ESC>[?51h Proportional fonts automatic NLQ and LQ


<ESC>[?51l Proportional fonts in draft mode possible (default)


<ESC>[?52h
Font selection (ESC[10...19m]) possible only for NLQ and LQ


<ESC>[?52l Font selection (ESC[10...19m]) Draft possible (default)


<ESC>[?53h Extended character set


<ESC>[?53l Standard character set


<ESC>[?6~ MTPL + EPSON LQ command set


<ESC>[?7h Line overrun = CR + LF


<ESC>[?7l
Line overrun = Truncating data outside of the printing area
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function