User Guide User Manual

Emulations User guide
148
List of available control
codes
The following table shows sequences marked by a 3 if they are avail-
able in the various emulations. The MTPL sequences can be used
within all emulation modes. The corresponding sequences are
marked by a ].
If you want to know more about control codes, we recommend
our Programmer’s Application Manual
on this CD-ROM.
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function


<BEL> Signal tone


<BS> Control character BS (Backspace)


<CAN> Deleting a data line


<CR> Control character CR (Carriage return)

<CSI> Start character for MTPL sequences, corr. ESC [


<DC1> Selecting the printer


<DC2> Condensed printing OFF (set by <Sl> or <ESC><Sl>)


<DC3> Deselecting the printer


<DC4> Double-wide printing OFF (set by <SO> or
<ESC><SO>)


<DEL> Delete line. Epson: Delete last character


<ESC> Start character for programming sequence


<ESC>!<n> Print mode selection


<ESC># Bit 8 = unchanged


<ESC>$<n1><n2> Perform absolute horizontal step


<ESC>%<0><0> Select ROM character generator


<ESC>%<1><0> Select download generator


<ESC>%1<n1><n2> Graphics print with 180 dpi/HQ


<ESC>%2<n1><n2> Graphics print with 360 dpi/HQ


<ESC>%3<n1> <n2> Graphics print with 60 dpi


<ESC>%4<n1> <n2> Graphics print with 120 dpi


<ESC>%5<n1> <n2> Graphics print with 80 dpi


<ESC>%7<n1> <n2> Graphics print with 240 dpi


<ESC>%8<n1> <n2> Graphics print with 72 dpi


<ESC>%9<n1><n2> Graphics print with 90 dpi


<ESC>&<s><x><y>.. Define download character


<ESC>(& Character set ISO 8859-2


<ESC>(* Character set ISO 8859-5


<ESC>(+ Character set ISO 8859-1 SAP


<ESC>(. Character set ISO 8859-9