User Guide User Manual

Troubleshooting User guide
126
Additional display messages
These are not error messages, they give operating instructions and
information from the printer to the user.
If messages appear which are not described here, please con-
tact your customer service representative with exact details of
the message.
Message Possible cause Corrective action
— ` To proceed press any key.
The factory-set parameters are
loaded and are written into all
menus.
` No action required.
Functions which have no meaning
in this emulation have been
selected.
` For this function please switch
to the appropriate emulation in
the menu, see Selecting emula-
tion (Emulate), (page 66).
You are informed when the fanfold
paper is in the park position.
` No action required.
Note for the operator to tear off the
paper automatically positioned at
the tear off edge.
` Tear paper off.
Paper is not available in the
selected paper path (… indicates
the active paper path). Data is in
the interface receiver buffer.
` Load paper, see section
Loading paper
, (page 39)
Press any key
Loading Default
Only available
in Epson Mode
Park position
Tear paper off
Load paper from
...