User Guide User Manual

Advanced menu User guide
110
Power save mode
(Sleepmod)
If the parameter Sleepmod is activated, the printer switches to en-
ergy-saving mode after 10 minutes of inactivity (<20 W).
Select the Sleepmod (3) menu.
Setting options: On/Off
Default setting: On
Confirm the setting by pressing the Set (1) key. Change to the next
parameter group with the Next key (4).
Automatic paper width
detection (APW)
The automatic paper width detection feature APW prevents the prin-
ter from printing beyond the paper edge. This is useful to prevent the
printer from printing on the platen, for example, because of an incor-
rect driver setting.
Select the APW (2) menu.
Setting options: On/Off
Default setting: On
If APW=On, the printer is in the standard mode and truncates all
data located beyond the right-hand and left-hand paper edge. These
print data are lost.
When you select APW=Off, the printer does not prevent undesirable
printing on the platen.
The printer determines the paper width by means of an optical sen-
sor in the print head module. The print head carriage moves once
across the maximum possible printable area of the paper and stores
the width measured in this process. The measuring process varies,
depending on the paper source selected.
The measurement is made
` after power-on and before the first print job;
` after paper end and before the subsequent print job; after
` changing the paper source (e.g. from Tractor 1 to Tractor 2).
SleepMod
Back Next
Online
Setup
SleepMod=On *
Set < > Exit
Online
Setup
21
3
4
APW AED
Back Next
Online
Setup
21
3
4
APW=On *
Online
Setup
Set < > Exit
21
3
4