User Guide User Manual

Advanced menu User guide
102
Enter advanced menu mode by pressing the Online key while
switching on the printer.
The display shows Test mode for approx. 1 second and then auto-
matically changes to display ASCII 80 ASCII 136.
Automatic paper motion
sensor (PMS)
You can use this function to activate or deactivate the paper motion
detection feature. When it is active, printing and paper movements
stop in case of a paper jam and an error message is output in the
display. Set the printer to test mode by pressing the Online key
while you switch on the printer.
Press the Next key (4).
Select the PMS menu (3).
Setting options: Off/Low/Mid/High
Default setting: Low
PMS=Low/Mid/High: The form movements of the active paper path
are monitored. In case of a paper jam, printing and paper move-
ments stop and an error message (paper jam) is displayed.
Low: Sensitivity 800/360"
Mid: Sensitivity 600/360"
High: Sensitivity 300/360"
PMS=Off: A paper jam will not produce an error message.
The Paper Motion Sensor (PMS) detects any paper jam or unin-
tended paper end condition and provides efficient protection
against any paper transport problems together with the paper
end sensor. This prevents the printer from printing on jammed
paper or printing without paper. Disabling the PMS can affect
the operational reliability of your printer and should therefore
be avoided.
Confirm the setting by pressing the Set (1) key. Change to the next
parameter group with the Next key (4).
Testmode
Initializing ...
Online
Setup
21
3
4
ASCII80 ASCII136
Online
Setup
Back Next
21
3
4
H-Dump PMS
Online
Setup
Back Next
21
3
4
PMS=Low *
Online
Setup
Set < > Exit
21
3
4