User Guide User Manual

User guide The Menu
91
Setting the right margin
(RightMrg)
The right print margin can be set to a fixed value.
Press RightMrg (3) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 2–136/10“
Default Setting: 136/10“
The value may not fall below the LeftMrg value.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Local copy (screen print)
from a Coax or Coax/IPDS
(FFaftLC)
To provide maximum compatibility to Coax/Twinax interfaces the
function "FormFeed after Local Copy" has been implemented. This
feature is ON per default. It is recommended to disable this feature
(OFF) if problems in connection with Coax/Twinax/IPDS interfaces
occur.
Press FFaftLC (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Off/On
Default Setting: On
Confirm the setting by pressing the Set key (1).
LeftMrg RightMrg
Online
Setup
21
3
4
Back Next
RightMrg=136/10*
Online
Setup
Set < > Exit
21
3
4
FFaftLC Paphand
Online
Setup
21
3
4
Back Next
FFaftLC=ON *
Online
Setup
Set < > Exit
21
3
4