Quick Start Guide Manual

Paper handling Quick start guide
22
` Moving the paper to the tear
position
You can use the Tear key to move the paper to the tear position. The tear edge is
located at the front side of the paper output opening.
Make sure that the printer is in online mode. If necessary, press the Online key.
Press the Tear (4) key. The printer moves the perforation edge of the fanfold paper
to the tear edge of the top cover .
The display alternates between…
and…
After having torn off the paper, press the Exit key. The printer returns the paper to
the first printing position.
If a print job is active, the printer automatically returns the paper to the first print-
ing position.
Tear edge
Quick
Start
-
en
.
book
Seite
22
Dienstag
,
15
.
September
2009
3:50
15