Quick Start Guide Manual

Quick start guide Control panel
11
ENGLISH
` Setup mode In this mode, the following settings are available:
 Setup key: Sets the printer to setup mode, in which the following settings can
be selected:
 Menu key (1): Other menu settings. Access may be disabled by the manufac-
turer (see note below).
 Adjust key (2): Sets the Tear position, first printing line and print head gap.
 Paperway key (3): Sets the Paper path.
 Char key (4): Font and number of characters per inch.
Access to the other menu settings (Menu) may be – depending on the model – dis-
abled by the manufacturer. For information on how to enable access and about the
available settings, refer to the User Guide on the Online CD-ROM (section “En-
abling the menu”).
Quick
Start
-
en
.
book
Seite
11
Dienstag
,
15
.
September
2009
3:50
15