User Guide User Manual

User guide Installation

Installation

Unpacking the printer

Place your printer on a solid surface (see Placing

your printer, page 8).

Make sure that the “Up” symbols point in the cor-

rect direction.

Open the packaging, take out the accessory cas-

sette and unpack it. Pull the printer out of the card-

board box towards you and remove the remaining

packaging material.

Check the printer for any visible transport damage

and completeness. Apart from this CD-ROM (c)

the Quick start guide (d), the power cable (e) and

the ribbon (

f) must be included.

If you find any transport damage or if any accesso-

ries are missing, please contact your dealer.