User Guide User Manual

Emulations User guide
156

<ESC>[g<n1> <n2><2> Set graphics print to 120 dpi

<ESC>[g<n1> <n2><3> Set graphics print to 240 dpi

<ESC>[g<n1> <n2><8> Set graphics print to 60 dpi

<ESC>[g<n1> <n2><9> Set graphics print to 120 dpi


<ESC>[j Position paper back 1/180"


<ESC>[<n1> <n2>f Set absolute horizontal and vertical position


<ESC>[<n>+w Interface holding time n = 1 - 30 s


<ESC>[<n>+x Head position horizontal in n/720", also paper load pos.


<ESC>[<n>+y Printhead gap n = (0 - 100)


<ESC>[<n>+z Auto. or man. printhead gap adjustment


<ESC>[<n>SP q Load menu


<ESC>[<n1>...<n5>+v Paper handling options


<ESC>[<n1>...<n16>SP r Print transparent characters


<ESC>[<n1> <n2>f Set absolute horizontal and vertical position


<ESC>[<n1> <n2>SP 0 Change character size


<ESC>[<n1> <n2>SP D Select font


<ESC>[<n1> <n2>SP G Set character/line spacing


<ESC>[<n1> <n2>r Set top and bottom margin


<ESC>[<n1> <n2>s Set left and right margin


<ESC>[<n> a Set relative horizontal position


<ESC>[<n> d Set absolute vertical position


<ESC>[<n> e Set relative vertical position


<ESC>[<n> j Relative horizontal position back (to the left)


<ESC>[<n> k Relative vertical position back (to the top)


<ESC>[<n> p Set HMI


<ESC>[<n> q Set horizontal step


<ESC>[<n> SP \ Set additional spaces


<ESC>[<n> SP C Select character size


<ESC>[<n> SP f Set reduced spacing


<ESC>[<n> SP g Set character spacing


<ESC>[<n> SP h Line spacing


<ESC>[<n> SP s
Transmits the “n” character as an ASCII character (n= 0–255)


<ESC>[<n> SP U Beginning of line (default value)


<ESC>[<n> SP V End of line (default value)


<ESC>[<n> t Set form length in lines


<ESC>[<n> u Set horizontal tab
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function