User Guide User Manual

User guide Specifications
137
Cut sheet insertion via front
feed/manual
Multi part forms
(to be tested individually)
Copies Standard printer
2T model
Weight of original
Weight of copies
Weight of bottom sheet
Thickness (max.)
Width
Form length
1 + 5 max.
1 + 3 max.
50 to 60 g/m
2
45 to 56 g/m
2
50 to 60 g/m
2
0.6 mm
76 to 420 mm
76 to 305 mm
Envelopes Width
Length
Thickness
76 to 420 mm
76 to 305 mm
0.32 mm
Sets of forms Sets of forms may be used only if the top edge is bound. The binding
edge should be as soft as possible. A wavy binding edge may ham-
per the smooth feeding of these sets. Multi-part forms must be loaded
with the bound top edge down. Multi-part forms should be tested for
suitability.
Paper quality Light pulp paper of medium fine quality, paper bearing the quality
mark SM Post and photocopy paper are suitable for use. Unsuitable
are: satin-finisch or coated papers, imitation art papers, and
embossed papers.
Since paper as natural material reacts strongly to environmental influ-
ences (e.g. humidity, temperature), the place of storage should be
selected carefully. We recommend that this kind of paper should be
tested extensively before larger quantities are acquired.
Should papers with a dark reverse side be used, these should also be
tested for their functionality. Please pay attention to the use of infra-
red reflecting colors, when acquiring these papers.