Quick Start Guide Instruction Manual

➤ Moving the paper to
the tear position
You can use the Tear key to move the paper to the tear position.
Swing the soundproofing cover towards the front.
Make sure that the printer is in online mode. If necessary, press the Online key.
Press the Tear (4) key. The printer moves the perforation edge of the fanfold
paper to the tear edge of the top cover (see below).
The display alternates between…
and…
After having torn off the paper, press the Exit (4) key. The printer returns the
paper to the first printing position.
If a print job is active, the printer automatically returns the paper to the first
printing position.
Online Trac1
Tear
Online
Setup
21
3
4
Tear position
Trac1
Online
Setup
21
3
4
Online Tear
Exit
Online
Setup
21
3
4
Abreißkante
Tear edge
ENGLISH
Quick start guide Paper handling
21