Quick Start Guide Manual

Quick start guide Paper handling

ENGLISH

Single sheets

Some printer models are designed for fanfold pa-

per operation only and therefore do not feature a

single sheet feeder. The front cover can therefore

not be opened on these models.

Make sure that the printer is set to single sheet mode. If

necessary, change the paper type (see “Changing the paper

type”, page 18).

Press the latch at the middle of the front cover. The single

sheet input tray opens downwards.

Align the left paper guide with the mark on the left of the

single sheet input tray marking the first printing position.

Adjust the right paper guide to the width of the paper used.

Quick

Start

book

Seite

Freitag

Oktober

2009

1:20