Manual

Print Server Port Settings
Print Server User Manual 76
7.2 How to Enable the Fast Mode
The fast mode can be used to increase the speed. With older printer
models, it is recommended to disable the fast mode.
This fast mode is only available for external print server models.
What do you want
to do?
 ’Enabling the Fast Mode via the PRINTSERVER Homepage’
Ö76
 ’Enabling the Fast Mode via the PRINTSERVER-NetTool’ Ö76
Requirements
; The ECP mode must be disabled; see: Ö75.
Enabling the Fast Mode via the PRINTSERVER Homepage
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Configuration – Printer Port.
3. Tick Fast mode.
4. Click Save to confirm.
ª The setting is saved.
Enabling the Fast Mode via the PRINTSERVER-NetTool
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Double-click the print server in the print server list.
The Properties dialog appears.
3. Select Configuration – Printer Port.
4. Tick Fast mode.
5. Click OK to confirm.
ª The setting is saved.