Manual

Print Server Port Settings
Print Server User Manual 75
7.1 How to Enable the ECP Mode
The ECP (Enhanced Capability Port) mode can be used for quick and
compressed data transfer. Data compression using the RLE method
(Run Length Encoding) leads to compression rates of up to 64:1.
This ECP mode is only available for external print server models.
What do you want
to do?
 ’Enabling the ECP Mode via the PRINTSERVER Homepage’ Ö75
 ’Enabling the ECP Mode via the PRINTSERVER-NetTool’ Ö75
Enabling the ECP Mode via the PRINTSERVER Homepage
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Configuration – Printer Port.
3. Tick ECP mode.
4. Click Save to confirm.
ª The setting is saved.
Enabling the ECP Mode via the PRINTSERVER-NetTool
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Double-click the print server in the print server list.
The Properties dialog appears.
3. Select Configuration – Printer Port.
4. Tick ECP mode.
5. Click OK to confirm.
ª The setting is saved.