Manual

Print Server Status Information
Print Server User Manual 60
5.3 How to Print a Status Page
You can print status pages. The print server status page contains all
important basic information, such as the print server model, IP
address, etc.
Before a status page can be printed, you need to define the data
format of the status page. The data formats ASCII, DATAMAX (label
printer), and Citizen-Z (label printer) are available. The preset 'Auto
mode' automatically uses the appropriate data format.
A status page can only be printed if the printer supports one of
these data format: ASCII, DATAMAX, or Citizen-Z.
What do you want
to do?
 ’Defining the Data Format of the Status Page’ Ö60
 ’Printing the Status Page via the PRINTSERVER-NetTool’ Ö61
 ’Printing the Status Page via an FTP Connection’ Ö61
 ’Printing the Status Page via the Status Button’ Ö62
Defining the Data Format of the Status Page
Proceed as follows:
1. Start the PRINTSERVER Homepage or start the
PRINTSERVER-NetTool and double-click the print server in the
print server list.
2. Select Configuration – General.
3. Select the desired data format from the Status page mode list.
4. Click Save or OK to confirm.
ª The setting is saved.