Manual
Supported Network Protocols
Print Server User Manual 168
family. You can define various parameters for an ideal integration of
your print server into a TCP/IP network.
If you have disabled TCP/IP, all functions based on this protocol are
no longer available. This means that, for example, the PRINTSERVER
Homepage or FTP will no longer be available.
Proceed as follows:
1. Start the PRINTSERVER Homepage or start the
PRINTSERVER-NetTool and double-click the print server in the
print server list.
2. Select Configuration โ TCP/IP.
3. Configure the TCP/IP parameters; see: Table 15 ร๎168.
4. Click Save or OK to confirm.
ยช The settings are saved.
Table 15: TCP/IP Parameters
Parameters Description
TCP/IP Enables/disables TCP/IP
IP Address IP address of the print server
Subnet Mask Subnet mask of the print server
Gateway Gateway address of the print server
Multicast router as gateway If this parameter has been enabled, the address of
the found multicast router will be entered
automatically as gateway address.
If disabled, the gateway address has to be entered
manually.
Host name Host Name of the Print Server
(Upon delivery, the default name is displayed)
Contact person Freely definable description
Location Freely definable description