Manual
Print Server Certificate Management
Print Server User Manual 100
10.1 How to Create a Self-Signed Certificate
When a certificate is created on the print server for the first time, a
list of parameters is displayed that are required for the certificate.
If a self-signed certificate or a CA certificate has already been saved
in the print server, the content of this certificate will be displayed. In
this case you have to delete the existing certificate first; see: ’How
to Delete Certificates’ Ö108.
What do you want
to do?
’Creating Self-Signed Certificates via the PRINTSERVER
Homepage’ Ö100
’Creating Self-Signed Certificates via the PRINTSERVER-NetTool’
Ö100
Creating Self-Signed Certificates via the PRINTSERVER Homepage
Proceed as follows:
1. Start the PRINTSERVER Homepage.
2. Select Configuration – Certificates.
3. Select Print server certificate.
4. Enter the relevant parameters, see: Table 6 Ö101.
5. Click Create self-signed certificate.
ª The certificate will be created and installed. This may take a few
minutes.
Creating Self-Signed Certificates via the PRINTSERVER-NetTool
Proceed as follows:
1. Start the PRINTSERVER-NetTool.
2. Select a print server from the print server list.
3. Select Actions – Certificate – Server certificate from the menu
bar. The Certificate dialog appears.
4. Tick Create self-signed certificate.
5. Click Next.
6. Enter the relevant parameters, see: Table 6 Ö101.