User guide

Special mode Set-Up mode
4-5
To select a function from the <FUNCTIONS> menu:
Repeatedly press the PARK/PRINT/q key or the TEAR/p key to position the
function you require.
Press the FF/LOAD/Micro Feed Up/u key to select the function. The printer
prints the first parameter. Repeatedly press the PARK/PRINT/q key or the
TEAR/p key to position the option you require.
The first five PRINTER CONTROL parameters are shown below.
Press the FF/LOAD/Micro Feed Up/u key to select the option. The printer prints
the first value. Repeatedly press the PARK/PRINT/q key or the TEAR/p key to
position the value you require.
The EMULATION values are shown below.
If you leave the menu the last set item (e.g. PORT DEPEND) remains active and set.
<FUNCTIONS>
PRINTER CONTROL
EMULATION
EMUL PARALLEL
EMUL USB
EMUL SERIAL
EMUL ETHERNET
<FUNCTIONS>
PRINTER CONTROL
EMULATION
EPSON-EP
IBM XL
PORT DEPEND