User guide

Set-Up mode Special mode
4-4
Overview of the Set-Up Mode
Your Printer has eleven function menus in Set-Up mode.
When you press the PARK/PRINT/q key or the TEAR/p key, the following next or
previous <FUNCTIONS> menu is printed.
} PRINTER CONTROL
} FONT
} SYMBOL SETS
} SET-UP
} INTERFACE
} NETWORK
} COMMON (PUSH TRAC)
} PULL TRACTOR
} FRICTION
} RCALL-FACT
} SAVE&EXIT
The following table summarizes the purpose of each function.
Function Description
PRINTER CONTROL Changes the emulation (generally or by interface).
FONT Selects the Font, the Draft mode (Normal or High Speed
Draft) and the character pitch.
SYMBOL SETS Selects the IBM Set, code page (IBM), the character set
(Epson) and the style of the zero character (slashed/
unslashed).
SET-UP Selects the print direction: unidirectional, bidirectional or
softcontrol printing. Specifies the effect of CR (Carriage
Return) and LF (Line Feed) codes. Selects timeout, language,
safe panel and the printhead impact.
INTERFACE Changes settings for all interfaces.
NETWORK Changes network settings of the integrated print server
(option).
COMMON (PUSH
TRAC)
Changes push tractor settings (e.g. line density, margins, tear-
off function).
PULL TRACTOR Changes pull tractor settings (e.g. line density, margins, tear-
off function).
FRICTION Changes settings for the single sheet mode (e.g. line density,
margins, load function).
RCALL-FACT Resets all values of the Set-Up menu to the factory settings.
SAVE&EXIT Saves the settings and exits Set-Up mode.