User guide

4-1
4
Special mode
Your Printer has two operation modes:
• The Normal mode is used for daily operations like paper handling and printing as ex-
plained in Chapter 2, “Operating the printer” and Chapter 3, “Printing”.
• The Special mode is used to change the printer settings and to test the printer functions.
The following table summarizes the purpose of each function.
Special Mode Functions
Function Purpose
Set-Up Mode Change the Printer settings.
Print Configuration Print the Printer Configuration. To check your settings
by printing a list of all the printer’s currently selected
values.
Printing Test Run the printing test.
Hex Dump Mode Hex-dump allows you to determine whether the com-
puter is sending the correct commands to the printer.
This is useful for troubleshooting.
Printing Alignment Adjustment Perform adjustment Bi-directional alignment.
Top of Form Adjustment Perform adjustment of Top of Form.
Setting of The First Dot Posi-
tion on the left side
Change the left margin fine adjustment.
Menu Access Restricts access to Set-Up functions from the control
panel.
Setting Set-Up Mode to Default
Value (Standard)
Resets factory settings to standard.