User guide

Paper handling Operating the printer
2-28
Press the FF/LOAD/Micro Feed Up/u key to select the parameter group.
Press the PARK/PRINT/q six times.
} You have now reached the TEAR parameter.
Press the FF/LOAD/Micro Feed Up/u key to select the parameter.
} The current value is printed, MANUAL in our example.
Repeatedly press the FF/LOAD/Micro Feed Up/u key to position the desired
value, e.g. AUTO 1 SEC.
Press the SEL/MENU key to select the desired value and to activate the
SAVE&EXIT position.
Press the SEL/MENU key again to save the new value and exit the setup mode.
} The printer exits the setup mode and returns to the ready mode. The selected values
remain in effect until the next time they are changed.
<FUNCTIONS>
PRINTER CONTROL
FONT
SYMBOL SETS
SET UP
INTERFACE
COMMON (PUSHTRAC)
<PAPER SET>
<LPI>
<TOP MARGIN>
<BOTTOM MARGIN>
<FORM LENGTH>
<CENTERING>
<TEAR>
<PAPER SET>
<LPI>
<TOP MARGIN>
<BOTTOM MARGIN>
<FORM LENGTH>
<CENTERING>
<TEAR>
MANUAL
AUTO 1 SEC