User guide

Paper handling Operating the printer

2-26

Setting the first printing line (TOF)

You can use the TOF function for setting the vertical position of the first printing line.

To adjust the first printing line vertically, proceed as follows:

Either transport fanfold paper to the next top of form position or feed an inserted

single sheet by pressing the LOAD/EJECT key.

Make sure that the printer is in offline mode; press the ONLINE key, if necessary.

Hold the ONLINE key depressed for 3 seconds, and use the Micro Feed Down or

Micro Feed Up keys to adjust the desired first printing line. Each micro feed will

feed the paper down or up in 1/180 inch increments.

After releasing the key, the new adjusted first printing line is saved.

The mark A on the transparent paper pro-

tective cover of the printhead can be help-

ful if you want to adjust the first printing

line.