User's Manual

28 SkyZhone 1604, 1404, 1204 Hardware Install Guide
Wall-mounting enclosure kit
The SkyZhone access point wall-mounting enclosure kit (920-07811-01) contains the
following items:
• One wall bracket
• One paintable decorative cover
• 4 (four) tamper-resistant mounting screws to mount the unit to the bracket
• 6 (six) mounting screws for the decorative cover
• 1 driver bit for the tamper-resistant screws
• Not included: 4 screws that will go through the metal bracket, plastic cover and
into your wall’s surface.
Wall-mount kit (without plastic cover)
The SkyZhone access point wall-mount kit (without plastic cover) contains the
following items:
• One wall bracket
• 4 (four) tamper-resistant screws
• 1 driver bit for the tamper-resistant screws
Customer supplied equipment
For installation, you need the following items:
• Large slotted screw driver to secure the banding clamps
• 7/16-inch nut driver
• Cordless screwdriver with a 2 1/2 " extension to be able to secure the tamper-
resistant screws, or a screwdriver that can receive a tamper-resistant screw that
is at least three inches long.