User's Manual

IDU installation
SkyZhone 45 Installation Guide
35
D
R
AFT
Figure 14: Cabling IDU to ODU
Electrical installation
Before any other connections are made, connect a ground wire to the terminal
marked with the grounding symbol (see Figure 15).
Figure 15: Electrical connector locations
IDU to ODU cable connection
Locate the TNC-style connector on the left side of the IDU rear panel. It is
connected to the ODU with a contractor-supplied RG-6 coaxial cable. Install
the surge protector that was included with the system on the IDU female TNC
connector, then connect the cable between the IDU and ODU.
Note: Exposed cabling should be protected in conduit.
Grounding symbol