User's Manual

Installation
34 SkyZhone 45 Installation Guide
DR
A
FT
Figure 12: IDU installation
System interconnections
Figure 13 shows the connections made on the IDU.
Figure 13: Connecting IDU Interfaces
Cabling IDU to ODU
Before connecting the IDU to the ODU, check the electrical continuity of the
center conductor and the ground shield end-to-end. This verifies that the
connectors have been installed properly.
Connect the IDU to the ODU only after a ground connection has been made at
the IDU and the surge protector is installed on the IDU TNC female
connector.
Install the 75 Ohm cable between the ODU and the IDU as shown in
Figure 14.