User's Manual
Table Of Contents
- SkyZhone 45 installation Guide
- Federal Communications Commission (FCC) Part 15 Regulation
- Contents
- About This Guide
- Overview
- Preparing for Installation
- Installation
- Provisioning
- System Maintenance
SkyZhone 45 Installation Guide 25
3
DR
A
FT
INSTALLATION
This explains how to install the SkyZhone 45 system and includes the
following sections:
• Important safety instructions, page 25
• Antenna installation, page 27
• ODU installation, page 28
• IDU installation, page 33
• ODU LEDs, page 37
• IDU LEDs, page 37
WARNING! Every part of this microwave radio system, including
antennas, must be properly grounded. Grounding maximizes the
system performance, minimizes lightning damage, and ensures
safety. Make sure ground connections are available for all of the
SkyZhone 45 equipment before beginning the installation.
Important safety instructions
The SkyZhone 45 system equipment is designed and manufactured in
compliance with safety standard EN60950.
Following these precautions will ensure personal safety and prevent damage
to the SkyZhone 45 equipment or to other connected equipment.
Note: Read and follow all warning notices and instructions marked
on the product or included in this guide.
Safety instructions:
1 The SkyZhone 45 product should be installed by professionals. If this
product was not purchased directly from Zhone or an authorized
distributor, contact Zhone Technologies, Inc. for referral to a professional
installer. Non-authorized installation is in possible violation of FCC
regulations.