User Manual

User Manual
120
Vodsl Console Log Level: Select it from the drop-down list.
SIP Log Server Settings: Set SIP log server IP address and port, then the
log message of the VoIP is sent to the device which IP address you set to. If
you want use this function, both of the IP address and port must be set
correctly.
Gain Settings: Gain is a measure of the ability of a circuit (often an amplifier)
to increase the power or amplitude of a signal. You can increase or decrease
ingress gain and egress gain. The range of the value is from -14 to 6.
5.4.6 VoIP Functionality
This section describes how to use the VoIP function of the DSL router in more
detail. Some features involve 2 or 3 parties. In that case, note that all 3 parties have
to be successfully registered.
5.4.6.1 Registering
Before using any VoIP functions, the DSL router has to register itself to a registrar.
The DSL router also has to be configured with a proxy, which relays VoIP signaling