User Manual

User Manual
113
SIP domain name: Enter the SIP domain name that you want to set.
Use SIP Proxy: Select the checkbox of Use SIP Proxy, if your DSL router
uses a SIP proxy. SIP proxy allows other parties to call DSL router through it.
When it is selected, the following fields appear.
– SIP Proxy: The IP address of the proxy.
– SIP Proxy port: The port that this proxy is listening on. By
default, the port value is 5060.
Use SIP Outbound Proxy: Some network service providers require the use
of an outbound proxy. This is an additional proxy, through which all outgoing
calls are directed. In some cases, the outbound proxy is placed alongside the
firewall and it is the only way to let SIP traffic pass from the internal network
to the Internet. When it is selected, the following fields appear.
– SIP Outbound Proxy: The IP address of the outbound
proxy.
– SIP Outbound Proxy port: The port that the outbound
proxy is listening on. By default, the port value is 5060.
Use SIP Registrar: Select the checkbox of Use SIP Registrar to register
with the proxy. You can register your user ID on the SIP registrar. SIP
registrar works with SIP proxy, allowing other parties to call DSL router
through it. When it is selected, the following fields appear.
– SIP Registrar: The IP address of the SIP registrar.
– SIP Registrar port: The port that SIP registrar is listening
on. By default, the port value is 5060.
Account Enabled: If it is unselected, the corresponding account is disabled.
You can not use it to initiate or accept any call.