User's Manual

66xx/67xx Router Users Guide 97
To add a rule:
1. In the Quality of Service—QoS Classification screen, click Add.
2. In the Add Network Traffic Class Rule screen give a name to this traffic class.
3. Assign a rule order to this traffic class.
4. Enable the rule in the Rule Status.
5. Enter Security Classification Criteria:
Class Interface: The interface to apply the rule on. Depending on the class of interface
options for the traffic rule will change.
Ether Type: Type of Ethernet packet used on the interface. Depending on the Ether Type
selected, options for the traffic rule will change.
6. Enter Classification Results.
7. Click Save / Apply to save the settings.