User's Manual

66xx/67xx Router Users Guide 81
NAT
You can configure Virtual Servers, Port Triggering, and DMZ Host when NAT (Network Address
Translation) is enabled.
Virtual Servers
A virtual server allows you to direct incoming traffic from the WAN side to a specific IP address on
the LAN side. The following figure shows the screen that allows you to configure your virtual
server(s).
To direct incoming traffic from a service (or other server):
1. Click Add to configure a virtual server.
2. Either select a service (by using the Select a Service dropdown) or select a custom server
(by entering the IP address of the server in the Custom Server text box).
You can select a Service or make a new one.
3. Enter the IP address of the LAN side PC in the Server IP Address text box.
4. Click Save / Apply to submit the configuration.