User's Manual

66xx/67xx Router Users Guide 31
3. Connect the power adapter
Complete the process by connecting the AC power adapter to the Power connector
on the back of the device and plug the adapter into a wall outlet or power strip. Then
turn on and boot up your PC and any LAN devices, such as hubs or switches, and
any computers connected to them.
For single line gateways (non bonded xDSL)
Complete the process by connecting the AC power adapter to the Power connector
on the back of the device and plug the adapter into a wall outlet or power strip. Then
turn on and boot up your PC and any LAN devices, such as hubs or switches, and
any computers connected to them.
For situations where a phone is also used: