User's Manual
66xx/67xx Router Users Guide 17
System Requirements
In order to use your xDSL router for Internet access, you must have the following:
WAN service from your provider. This can be any one of the following:
DSL
Ethernet
A PC with:
An Ethernet 10/100BaseT network interface card
A processor equivalent to or faster than a Pentium II 133 MHz
32 MB RAM or greater
Windows 95b, 98, 98SE, 2000, ME, NT, XP, Vista or Windows 7. (Note:
Windows 95 requires the installation of the Winsock program, not included.)
(Optional) An Ethernet hub or switch, if you are connecting the device to several
computers on an Ethernet network.
For system monitoring or configuration using the supplied web interface, a web browser
such as Internet Explorer Version 6.0 or later. Netscape is not supported.
Package Contents
In addition to this document, your package should arrive containing the following:
6xxx-W1 xDSL router
12V 2A power adapter
Quick Install Guide
RJ-11 telephone cable
Power supply
6618-W1 12V 1A
671x 12V 1.5A
6728, 673x 12V 2A
6729-W1, 6768-W1 12V 2.5A
For single line xDSL gateways:
RJ-45 Ethernet cable
For bonded xDSL gateways:
Y cable which connects two ports to gateway