User's Manual

66xx/67xx Router Users Guide 139
MAC Filter
By default, MAC filter is disabled meaning any WiFi clients with the correct access will be allowed
to access the Access Point. The MAC filter screen allows you to control what WiFi clients are
allowed or deny to access the WiFi Access Point using the MAC address of the devices.
1. In the Wireless — MAC Filter page, select the SSID you want configure for WiFi client
access.
2. From one of the MAC Restrict Mode radio buttons, select Disabled, Allow or Deny, then
click on Add to add the MAC addresses you want to be able to access the WiFi network.
3. To block certain WiFi Clients from accessing the WiFi network, select Deny, then click Add
to add the MAC address of the WiFi client you want to block from Accessing the WiFi
network.