User's Manual
66xx/67xx Router Users Guide 133
Security
The Wireless – Security screen allows you to select the network authentication method and to
enable or disable WPS (WiFi Protected Setup).
The default setting is WiFi enable with WPS/PSK security. The pass phrase is printed on the label
at the bottom of the unit.
Note that depending on whether WPS is enabled and the network authentication method that is
selected, the screen will change accordingly so additional fields can be configured for the specific
authentication method.
WPS setup
• Enable WPS: WPS securely allows client access to the router. When you enable WPS,
clients must start the access process within two minutes. The router supports the PIN WPS
method only.
• Add Client: For WPA-PSK, WPA2 PSK or OPEN modes, enter a PIN, then click Add
Enrollee. The client must enter this PIN within two minutes to start the WPS procedure.