User's Manual

Zhone 2800 Series FiberJACK ONT
30 Zhone 2800 Series FiberJACK ONT Hardware Installation Guide
Figure 9: 281x Series FiberJACK ONT controls and switches
Power On/Off Switch
zNID 280x models. The Power On/Off Switch is located on the left side of
the 280x ONT faceplate.
zNID 281x models. The Power On/Off Switch is located on the right side,
above the Reset Switch but is under the faceplate.
This switch is primarily for Installation Technicians, providing them with an
easy means to control power on/off for the unit during the installation or
troubleshooting process while the faceplate is removed.
A slot on the left side of the faceplate provides a means to power on/off the
unit without having to remove the faceplate using a pen cap, paper clip or
small slot screwdriver.