User's Manual

Zhone 2800 Series FiberJACK ONT models
Zhone 2800 Series FiberJACK ONT Hardware Installation Guide
23
Interfaces Uplinks:
• GPON:
– SC/APC connector
– Full ITU-T G.984 compliance
– 1310nm Tx (Upstream)
– 1490nm Rx (Downstream)
– Fixed SFF optics
– Tx (Upstream) line rate 1.25 Gbps
– Tx Launch Power: +0.5 to +5.0 dBm
– Rx (Downstream) line rate: 2.5 Gbps
– Rx Receiver Sensitivity: -28 dBm
– Rx Input Power Overload: -8 dBm
– Dying gasp support
• GE:
– SC/UPC connector
– 1310nm Tx (Upstream)
– 1490 nm Rx (Downstream)
– Fixed SFF optics
– Tx data rate 1.0 Gbps
– Tx Launch Power: -8.0 to -2.0 dBm
– Rx data rate: 1.0 Gbps
– Rx Receiver Sensitivity: -23 dBm
– Rx Input Power Overload: -2 dBm
Customer facing interfaces (Depends on model):
–GE ports
– RJ-45 Jacks
– 2 or 4 x 10/100/1000 Base-T ports
– Meets IEEE 802.3 specifications
– Auto-MDI/MDIX and auto speed supported
– Per-port Link/Activity, Speed, and PoE status indicators
– PoE support on all ports
– Max 20W PoE load per ONT (2804P models)
– Max 15W PoE load per ONT (281xP models)
– POTS interfaces (RJ11)
– Wi-Fi interface (Dual 802.11b/g/n)
– Coaxial interface (RF video overlay (47–870MHz))
Table 4: Zhone 2800 Series FiberJACK ONT common specifications (Continued)
Specifications Values