User's Manual

Zhone 2800 Series FiberJACK ONT Hardware Installation Guide 15
ZHONE 2800 SERIES FIBERJACK ONT
This chapter describes the 2800 Series of zNIDs. It includes the following
sections:
• Overview, page 15
• Zhone 2800 Series FiberJACK ONT features, page 18
• Zhone 2800 Series FiberJACK ONT models, page 18
• Zhone 2800 Series FiberJACK ONT specifications, page 21
• Zhone 2800 Series FiberJACK ONT dimensions, page 27
• Zhone 2800 Series FiberJACK ONT LEDs, page 32
• Logging in to the 2800 Series ONT, page 35
Overview
The Zhone 2800 Series FiberJACK ONT zNID (Zhone Network Interface
Device) is a family of indoor residential GPON or Gigabit Ethernet fiber
based devices which are standards based Consumer Premises Equipment
(CPE) designed for advanced triple-play deployments. These indoor models
in Zhone's zNID product line of ONT's can be installed directly in the wall
using standard size electrical wall outlet boxes.
The Zhone 2800 Series FiberJACK ONTs may be provisioned using the same
intuitive Web interface and CLI as the Zhone 2400, 2600 and 4200 Series
ONTs, as well as through USP (Unified Service Provisioning), the Zhone
Network Management System (ZMS), or using a TR-069-compliant ACS.
The GPON ONTs comply with standard OMCI definitions and are
manageable at remote sites supporting the full range of FCAPS functions
including supervision, monitoring and maintenance.
More information about management capabilities see the Zhone zNID
Configuration Guide.