User's Manual

Connecting RF video coaxial port
zNID 27xx Series Hardware Installation Guide
49
Connecting RF video coaxial port
Connect RF coaxial port
Some models of the zNID provide a coaxial connector for RF video
connections.
For RF video, connect a coaxial cable as shown in Figure 21.
1 Locate the premises’ coaxial cable.
2 If the cable is not terminated, follow local practices to attach a coaxial
connector.
3 Screw the coaxial connector to the VIDEO coaxial port and tighten by
hand.
Figure 21: The coaxial video port.