User's Manual

zNID 27xx Installation
38 zNID 27xx Series Hardware Installation Guide
Mount the zNID
The zNID enclosure can be mounted on a vertical surface (wall) or placed on
a horizontal surface such as a desktop or shelf.
Caution: To prevent damage to the enclosure, use screws
appropriate to the mounting surface.
Précaution : Afin d'éviter d'endommager l'enceinte, utilisez des vis
adaptées à la surface de montage.
Caution: Install the zNID fiber tray a proper height from the floor.
Précaution : Installez le plateau de fibres zNID à une hauteur
correcte par rapport au sol.
Caution: The zNID should always be mounted in a vertical
orientation.
Précaution : Le zNID doit toujours être monté en orientation
verticale.