User's Manual

zNID 27xx series
18 zNID 27xx Series Hardware Installation Guide
accommodations. An easy to use wall-mounting bracket is included.
Simplified and easy-to-read indicators allow for quick troubleshooting when
the Internet has gone to avoid unnecessary cable-pulling and power-cycling.
Hospitality installations will appreciate the guest-friendly indicator modes
(Day, Night, Off). Extensive diagnostics in the ONT (run locally on the ONT
or remotely from the NOC) reduce service call disruptions.
The zNID 27xx Series (Zhone Network Interface Device) is a family of
indoor residential GPON ONTs which are standards based Consumer
Premises Equipment (CPE) designed for advanced triple-play deployments in
campus and business environments. The indoor models in Zhone's zNID
product line of ONT's provide a lower cost alternative to outdoor ONT
solutions.
The 27xx series Single Family Unit (SFU) ONTs provide the same voice
features found on the 9xxx and 42xx series of outdoor residential ONTs.
SIP-PLAR signaling is supported for connection via Zhone's Voice Gateway
to traditional Class 5 TDM switches, while both MGCP and SIP are supported
for direct connection to a VoIP Softswitch. This flexibility allows Zhone's
42xx, 9xxx, 24xx, 26xx, 27xx and 28xx series ONTs to work in nearly all
Telco networks, with interoperability support for a broad array of
Softswitches.
The GE LAN ports can be separated into different services allowing the
configuration of dedicated ports for IP video and data for one or more
customers. Unique VLANs may be configured per customer to ensure full
isolation of each customer’s data traffic.
The 27xx Series ONTs can be either be placed freestanding on a desktop or
wall mounted using the included bracket. UPS (uninterruptable power source)
battery backup options are available for maintaining lifeline services during
AC power outages.
The zNID 27xx series may be managed by
• Unified Service Provisioning (USP)
• Zhone Management System (ZMS)
• Web (HTTP)
• EZ Touch (Zhone’s CPE and zNID management application)
• Command Line Interface (CLI/Telnet/SSH)
• SNMP
More information about managment capabilities see the zNID Configuration
Guide.