zNID 24xx Installation
50 zNID Hardware Installation Guide
Connecting Ethernet ports
The zNID-24xx series models have up to 4 Gigabit Ethernet ports.
Connect Ethernet ports
The zNID provides RJ eight pin modular jacks (RJ45) for Ethernet
connections. Ethernet connections can be used to deliver any packet services
including IPTV, data, and VoIP.
For Ethernet services, connect a Category 5 or a Category 6 cable to an RJ45
interface as shown in Figure 18.
1 Locate the Ethernet LAN cable.
2 If the cable is not terminated, follow local practices to attach an RJ-45
connector.
3 Plug the Ethernet cable into the appropriate RJ-45 Ethernet port.
Figure 18: The RJ-45 Ethernet ports.
4 Repeat steps 1-3 as needed to connect additional Ethernet cables.
For pinout information for the Gigabit Ethernet connector, see Gigabit
Ethernet pinouts on page 53.
